The ThermaLux

Insulated Sectional Overhead Door

Panel Specification

 

PANEL FINISH

EXTERIOR SKIN – made from 0.5mm thick HP200 Plastisol, Pvf2 or powder coated galvanised steel sheet.  Other ‘special’ exterior finishes are available on request.

INTERIOR SKIN – made from stucco embossed, white, polyester coated 0.4mm thick galvanised steel sheet.  Other interior skin finishes are available, eg. Plastisol.

Both exterior and interior skins are made from pre-hot-dipped galvanised steel sheet to BS EN 10147

 

PANEL DIMENSIONS

Height (standard)          -           -           530mm

Nominal Thickness         -           -           50mm

Maximum Width                        -           -           7800mm

Nominal Weight             -           -           7.00kg / linear metre

                                                            13.2kg / square metre

INSULATION PROPERTIES

50mm thick rigid CFC free (ODP zero) polyurethane foam.

Density             -           -           -           45 kg/m3

‘U’ Value           -           -           -           0.38 W/m2K

Average Sound Reduction Index (SRI)      23 dB

 

FIRE PROTECTION

Panel facing materials achieve a Class 1 surface spread of flame to BS 476 Part 7 1987 (1993) and Class 0 as defined by the Building Regulations 1985

 

 

 

 

EMMERSON  INDUSTRIAL  DOORS  LTD

Enterprise Way, Sherburn in Elmet, Leeds. LS25 6NA   Tel: 01977 685566  Fax: 01977 681981